dmesg - Realtek RTL8169 PCI Gigabit
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-21-generic (buildd@lgw01-21) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #37-Ubuntu SMP Mon Apr 18 18:33:37 UTC 2016 (Ubuntu 4.4.0-21.37-generic 4.4.6)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
tseg: 0000000000
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000f7feffff] usable
BIOS-e820: [mem 0x00000000f7ff0000-0x00000000f7ffefff] ACPI data
BIOS-e820: [mem 0x00000000f7fff000-0x00000000f7ffffff] ACPI NVS
BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001ffffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.3 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./S2881 Thunder K8SR Mainboard, BIOS 080010 06/14/2005
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x200000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0100000000 mask FF00000000 write-back
1 base 0000000000 mask FF80000000 write-back
2 base 0080000000 mask FFC0000000 write-back
3 base 00C0000000 mask FFE0000000 write-back
4 base 00E0000000 mask FFF0000000 write-back
5 base 00F0000000 mask FFF8000000 write-back
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xf8000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xf7ff0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
BRK [0x021fe000, 0x021fefff] PGTABLE
BRK [0x021ff000, 0x021fffff] PGTABLE
BRK [0x02200000, 0x02200fff] PGTABLE
BRK [0x02201000, 0x02201fff] PGTABLE
BRK [0x02202000, 0x02202fff] PGTABLE
BRK [0x02203000, 0x02203fff] PGTABLE
RAMDISK: [mem 0x33bd0000-0x35ddffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F6D40 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000F7FF0100 000054 (v01 A M I OEMXSDT 06000514 MSFT 00000097)
ACPI: FACP 0x00000000F7FF0281 0000F4 (v01 A M I OEMFACP 06000514 MSFT 00000097)
ACPI: DSDT 0x00000000F7FF0410 003591 (v01 0AAAA 0AAAA001 00000001 INTL 02002026)
ACPI: FACS 0x00000000F7FFF000 000040
ACPI: FACS 0x00000000F7FFF000 000040
ACPI: APIC 0x00000000F7FF0380 000084 (v01 A M I OEMAPIC 06000514 MSFT 00000097)
ACPI: OEMB 0x00000000F7FFF040 000041 (v01 A M I OEMBIOS 06000514 MSFT 00000097)
ACPI: SRAT 0x00000000F7FF39B0 000110 (v01 A M I OEMSRAT 06000514 MSFT 00000097)
ACPI: HPET 0x00000000F7FF3AC0 000038 (v01 A M I OEMHPET 06000514 MSFT 00000097)
ACPI: ASF! 0x00000000F7FF3B00 000086 (v01 AMIASF AMDSTRET 00000001 INTL 02002026)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 1 -> APIC 0x02 -> Node 1
SRAT: PXM 1 -> APIC 0x03 -> Node 1
SRAT: Node 0 PXM 0 [mem 0x00100000-0xf7ffffff]
SRAT: Node 1 PXM 1 [mem 0x100000000-0x1ffffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0xffffffff]
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009fbff]
NUMA: Node 0 [mem 0x00100000-0xf7ffffff] + [mem 0x00000000-0x0009fbff] -> [mem 0x00000000-0xf7ffffff]
NODE_DATA(0) allocated [mem 0xf7feb000-0xf7feffff]
NODE_DATA(1) allocated [mem 0x1ffff6000-0x1ffffafff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000001ffffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000f7feffff]
node 1: [mem 0x0000000100000000-0x00000001ffffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000000f7feffff]
On node 0 totalpages: 1015694
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 15808 pages used for memmap
DMA32 zone: 1011696 pages, LIFO batch:31
Initmem setup node 1 [mem 0x0000000100000000-0x00000001ffffffff]
On node 1 totalpages: 1048576
Normal zone: 16384 pages used for memmap
Normal zone: 1048576 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 5, version 17, address 0xfebff000, GSI 24-27
IOAPIC[2]: apic_id 6, version 17, address 0xfebfe000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x102282a0 base: 0xfec01000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xf7ff0000-0xf7ffefff]
PM: Registered nosave memory: [mem 0xf7fff000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xff77ffff]
PM: Registered nosave memory: [mem 0xff780000-0xffffffff]
e820: [mem 0xf8000000-0xff77ffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:2
PERCPU: Embedded 33 pages/cpu @ffff8800f3e00000 s98008 r8192 d28968 u1048576
pcpu-alloc: s98008 r8192 d28968 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 [1] 2 3
Built 2 zonelists in Node order, mobility grouping on. Total pages: 2031993
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xe8000000-0xebffffff] (65536KB)
PM: Registered nosave memory: [mem 0xe8000000-0xebffffff]
Memory: 7942216K/8257080K available (8356K kernel code, 1278K rwdata, 3920K rodata, 1476K init, 1292K bss, 314864K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:592 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2192.811 MHz processor
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 4385.62 BogoMIPS (lpj=8771244)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 1 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff820b2000 - ffffffff820b9000)
ftrace: allocating 31878 entries in 125 pages
smpboot: Max logical packages: 2
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: APIC(2) Converting physical 1 to logical package 1
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: Dual Core AMD Opteron(tm) Processor 875 (family: 0xf, model: 0x21, stepping: 0x0)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
.... node #1, CPUs: #2 #3
x86: Booted up 2 nodes, 4 CPUs
smpboot: Total of 4 processors activated (17542.87 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xf7fff000-0xf7ffffff] (4096 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 17:59:40, date: 09/21/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
node 0 link 2: io port [1000, ffffff]
TOM: 00000000f8000000 aka 3968M
node 0 link 2: mmio [a0000, bffff]
node 0 link 2: mmio [f8000000, ffffffff]
TOM2: 0000000200000000 aka 8192M
bus: [bus 00-ff] on node 0 link 2
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xf8000000-0xffffffff]
bus: 00 [mem 0x200000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150930/hwxface-580)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:06.0: [1022:7460] type 01 class 0x060400
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [1022:7468] type 00 class 0x060100
pci 0000:00:07.1: [1022:7469] type 00 class 0x01018a
pci 0000:00:07.1: reg 0x20: [io 0xffa0-0xffaf]
pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:07.2: [1022:746a] type 00 class 0x0c0500
pci 0000:00:07.2: reg 0x10: [io 0xcc00-0xcc1f]
pci 0000:00:07.2: System wakeup disabled by ACPI
pci 0000:00:07.3: [1022:746b] type 00 class 0x068000
pci 0000:00:0a.0: [1022:7450] type 01 class 0x060400
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:0a.1: [1022:7451] type 00 class 0x080010
pci 0000:00:0a.1: reg 0x10: [mem 0xfebff000-0xfebfffff 64bit]
pci 0000:00:0b.0: [1022:7450] type 01 class 0x060400
pci 0000:00:0b.0: System wakeup disabled by ACPI
pci 0000:00:0b.1: [1022:7451] type 00 class 0x080010
pci 0000:00:0b.1: reg 0x10: [mem 0xfebfe000-0xfebfefff 64bit]
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:00:19.0: [1022:1100] type 00 class 0x060000
pci 0000:00:19.1: [1022:1101] type 00 class 0x060000
pci 0000:00:19.2: [1022:1102] type 00 class 0x060000
pci 0000:00:19.3: [1022:1103] type 00 class 0x060000
pci 0000:03:00.0: [1022:7464] type 00 class 0x0c0310
pci 0000:03:00.0: reg 0x10: [mem 0xfeafc000-0xfeafcfff]
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:03:00.1: [1022:7464] type 00 class 0x0c0310
pci 0000:03:00.1: reg 0x10: [mem 0xfeafd000-0xfeafdfff]
pci 0000:03:00.1: System wakeup disabled by ACPI
pci 0000:03:05.0: [1095:3114] type 00 class 0x018000
pci 0000:03:05.0: reg 0x10: [io 0xbc00-0xbc07]
pci 0000:03:05.0: reg 0x14: [io 0xb880-0xb883]
pci 0000:03:05.0: reg 0x18: [io 0xb800-0xb807]
pci 0000:03:05.0: reg 0x1c: [io 0xac00-0xac03]
pci 0000:03:05.0: reg 0x20: [io 0xa880-0xa88f]
pci 0000:03:05.0: reg 0x24: [mem 0xfeafec00-0xfeafefff]
pci 0000:03:05.0: reg 0x30: [mem 0xfea00000-0xfea7ffff pref]
pci 0000:03:05.0: supports D1 D2
pci 0000:03:06.0: [1002:4752] type 00 class 0x030000
pci 0000:03:06.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:03:06.0: reg 0x14: [io 0xb000-0xb0ff]
pci 0000:03:06.0: reg 0x18: [mem 0xfeaff000-0xfeafffff]
pci 0000:03:06.0: reg 0x30: [mem 0xfeac0000-0xfeadffff pref]
pci 0000:03:06.0: supports D1 D2
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0: bridge window [io 0x9000-0xbfff]
pci 0000:00:06.0: bridge window [mem 0xfc900000-0xfeafffff]
pci 0000:00:0a.0: PCI bridge to [bus 02]
pci 0000:01:03.0: [10ec:8169] type 00 class 0x020000
pci 0000:01:03.0: reg 0x10: [io 0x8800-0x88ff]
pci 0000:01:03.0: reg 0x14: [mem 0xfc8ffc00-0xfc8ffcff]
pci 0000:01:03.0: reg 0x30: [mem 0xfc8c0000-0xfc8dffff pref]
pci 0000:01:03.0: supports D1 D2
pci 0000:01:03.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:0b.0: PCI bridge to [bus 01]
pci 0000:00:0b.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:0b.0: bridge window [mem 0xfc800000-0xfc8fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
vgaarb: setting as boot device: PCI:0000:03:06.0
vgaarb: device added: PCI:0000:03:06.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:06.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xf7ff0000-0xf7ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfec01000, IRQs 2, 8, 19
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:05: [io 0x0680-0x06ff] has been reserved
system 00:05: [io 0x0295-0x0296] has been reserved
system 00:05: [io 0x0778-0x077f] has been reserved
system 00:05: [io 0x0b78-0x0b7f] has been reserved
system 00:05: [io 0x0f78-0x0f7f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x1000-0x10bf] could not be reserved
system 00:06: [io 0x10e0-0x10ff] has been reserved
system 00:06: [io 0x10c0-0x10df] has been reserved
system 00:06: [io 0xde00-0xde7f] has been reserved
system 00:06: [io 0xde80-0xdeff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: [mem 0xfff80000-0xffffffff] has been reserved
system 00:07: [mem 0xff780000-0xff7fffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x000c0000-0x000dffff] could not be reserved
system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:08: [mem 0x00100000-0xf7ffffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0: bridge window [io 0x9000-0xbfff]
pci 0000:00:06.0: bridge window [mem 0xfc900000-0xfeafffff]
pci 0000:00:0a.0: PCI bridge to [bus 02]
pci 0000:00:0b.0: PCI bridge to [bus 01]
pci 0000:00:0b.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:0b.0: bridge window [mem 0xfc800000-0xfc8fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xf8000000-0xffffffff window]
pci_bus 0000:03: resource 0 [io 0x9000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xfc900000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:01: resource 1 [mem 0xfc800000-0xfc8fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:07.3: boot interrupts on device [1022:746b] already disabled
pci 0000:00:0a.0: MSI quirk detected; subordinate MSI disabled
pci 0000:00:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
pci 0000:00:0b.0: MSI quirk detected; subordinate MSI disabled
pci 0000:00:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
pci 0000:03:06.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 34880K (ffff880033bd0000 - ffff880035de0000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ e8000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1f9babb623a, max_idle_ns: 440795317596 ns
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1474480781.200:1): initialized
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x24, linelength=3072, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xfd000000, mapped to 0xffffc90001000000, using 2304k, total 2304k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:03:00.0: OHCI PCI host controller
ohci-pci 0000:03:00.0: new USB bus registered, assigned bus number 1
ohci-pci 0000:03:00.0: irq 19, io mem 0xfeafc000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI PCI host controller
usb usb1: Manufacturer: Linux 4.4.0-21-generic ohci_hcd
usb usb1: SerialNumber: 0000:03:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci-pci 0000:03:00.1: OHCI PCI host controller
ohci-pci 0000:03:00.1: new USB bus registered, assigned bus number 2
ohci-pci 0000:03:00.1: irq 19, io mem 0xfeafd000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 4.4.0-21-generic ohci_hcd
usb usb2: SerialNumber: 0000:03:00.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: AMD CPU family 0xf not supported
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: fc7c0e9f152f32eca50ea2d9722926e5127af244'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 0:842:997
rtc_cmos 00:00: setting system clock to 2016-09-21 17:59:45 UTC (1474480785)
powernow_k8: fid 0xe (2200 MHz), vid 0x8
powernow_k8: fid 0xc (2000 MHz), vid 0xa
powernow_k8: fid 0xa (1800 MHz), vid 0xc
powernow_k8: fid 0xe (2200 MHz), vid 0x8
powernow_k8: fid 0xc (2000 MHz), vid 0xa
powernow_k8: fid 0xa (1800 MHz), vid 0xc
powernow_k8: Found 2 Dual Core AMD Opteron(tm) Processor 875 (4 cpu cores) (version 2.20.00)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1476K (ffffffff81f41000 - ffffffff820b2000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1872K (ffff88000182c000 - ffff880001a00000)
Freeing unused kernel memory: 176K (ffff880001dd4000 - ffff880001e00000)
random: systemd-udevd urandom read with 3 bits of entropy available
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
sata_sil 0000:03:05.0: version 2.4
pci 0000:00:07.3: AMD GPIO region 0x10b0 already in use!
scsi host0: sata_sil
scsi host1: sata_sil
scsi host2: sata_sil
scsi host3: sata_sil
ata1: SATA max UDMA/100 mmio m1024@0xfeafec00 tf 0xfeafec80 irq 17
ata2: SATA max UDMA/100 mmio m1024@0xfeafec00 tf 0xfeafecc0 irq 17
ata3: SATA max UDMA/100 mmio m1024@0xfeafec00 tf 0xfeafee80 irq 17
ata4: SATA max UDMA/100 mmio m1024@0xfeafec00 tf 0xfeafeec0 irq 17
pata_amd 0000:00:07.1: version 0.4.1
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
scsi host4: pata_amd
scsi host5: pata_amd
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata1.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133
ata1.00: 490234752 sectors, multi 0: LBA48
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA Maxtor 7Y250M0 11W0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/234 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:03.0 (unnamed net_device) (uninitialized): not PCI Express
r8169 0000:01:03.0 eth0: RTL8169sb/8110sb at 0xffffc90000e42c00, d8:5d:4c:81:6f:d1, XID 10000000 IRQ 24
r8169 0000:01:03.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133
ata2.00: 490234752 sectors, multi 0: LBA48
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA Maxtor 7Y250M0 11W0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 490234752 512-byte logical blocks: (251 GB/234 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg1 type 0
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
r8169 0000:01:03.0 enp1s3: renamed from eth0
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: ATA-8: KINGSTON SV300S37A120G, 506ABBF0, max UDMA/133
ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg2 type 0
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
ata4: SATA link down (SStatus 0 SControl 310)
floppy0: no floppy controllers found
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: sse2x1 gen() 1610 MB/s
raid6: sse2x1 xor() 2492 MB/s
raid6: sse2x2 gen() 2734 MB/s
raid6: sse2x2 xor() 2777 MB/s
raid6: sse2x4 gen() 2716 MB/s
raid6: sse2x4 xor() 1767 MB/s
raid6: using algorithm sse2x2 gen() 2734 MB/s
raid6: .... xor() 2777 MB/s, rmw enabled
raid6: using intx1 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 6095.000 MB/sec
generic_sse: 5892.000 MB/sec
xor: using function: prefetch64-sse (6095.000 MB/sec)
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
Btrfs loaded
random: nonblocking pool is initialized
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Set console keymap...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Load Kernel Modules...
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Nameserver information manager...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Mounting Debug File System...
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Journal Service.
EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP]
pci 0000:00:07.3: AMD GPIO region 0x10b0 already in use!
ACPI Warning: SystemIO range 0x000000000000CC00-0x000000000000CC1F conflicts with OpRegion 0x000000000000CC00-0x000000000000CC1F (\_SB_.PCI0.SMBC.ECIO) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC enabled.
EDAC amd64: K8 revE or earlier detected (node 0).
EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
EDAC amd64: DRAM ECC enabled.
EDAC amd64: K8 revE or earlier detected (node 1).
EDAC MC1: Giving out device to module amd64_edac controller K8: DEV 0000:00:19.2 (INTERRUPT)
EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
AMD768 RNG detected
ACPI Warning: SystemIO range 0x00000000000010E0-0x00000000000010EF conflicts with OpRegion 0x0000000000001000-0x00000000000010FE (\_SB_.PCI0.PMIO) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ppdev: user-space parallel port driver
SGI XFS with ACLs, security attributes, realtime, no debug enabled
XFS (sdb1): Mounting V5 Filesystem
XFS (sdb1): Ending clean mount
Adding 15624188k swap on /dev/sda1. Priority:-1 extents:1 across:15624188k FS
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
floppy0: no floppy controllers found
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[411]: Received request to flush runtime journal from PID 1
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1474480812.788:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=839 comm="apparmor_parser"
audit: type=1400 audit(1474480812.788:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=838 comm="apparmor_parser"
audit: type=1400 audit(1474480812.792:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=837 comm="apparmor_parser"
audit: type=1400 audit(1474480812.792:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=837 comm="apparmor_parser"
audit: type=1400 audit(1474480812.792:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=837 comm="apparmor_parser"
audit: type=1400 audit(1474480812.792:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=837 comm="apparmor_parser"
audit: type=1400 audit(1474480812.800:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lxd/lxd-bridge-proxy" pid=840 comm="apparmor_parser"
audit: type=1400 audit(1474480812.800:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/named" pid=841 comm="apparmor_parser"
audit: type=1400 audit(1474480812.804:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=836 comm="apparmor_parser"
audit: type=1400 audit(1474480812.804:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=836 comm="apparmor_parser"
r8169 0000:01:03.0 enp1s3: link down
IPv6: ADDRCONF(NETDEV_UP): enp1s3: link is not ready
r8169 0000:01:03.0 enp1s3: link down
cgroup: new mount options do not match the existing superblock, will be ignored
r8169 0000:01:03.0 enp1s3: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s3: link becomes ready